Tuesday, July 5, 2011

Conditioned Air? Yes Please!



The Mani Shop has gotten a little bit cooler recently. With RREAL's expansion last fall, we rearranged the HUG offices in the building. This rearrangement made the greenhouse the main hallway and we found that in the summer heat this made the attached offices extremely uncomfortable. With a large area to cool and high costs of operating a concern, a normal air conditioning unit would not meet the needs of the shop. So, a new air conditioner was designed.

Using a furnace blower as the core, we designed the unit to work with cold water instead of a compressor. Using a radiator coil we inherited from an old grocery store, we are able to transfer the cold via an air exchanger to the blower at a rate of 2.5 gallons per second. We get a second use out of the water, too. We divert the water after it's used to help in watering the living garden on the roof via a sprinkler system. Plus, any additional overflow goes to the pond in front of the Mani Shop.

Here you can see Ryan installing the holes for the duct work.


It also recirculates the air it uses. This lets the unit work less often and keeps the air in the building colder, longer. This is very useful because the AC unity can push up to 2000 cubic feet of air per minute. This recirculation cleans the air and with an activated charcoal filter, it helps keep the air fresh by absorbing odors.

It was given a wooden bracket for a brace and was placed in the mezzanine level for easy access and maintenance.

Here you can see the air ducts and water hose.

The system is working wonderfully, now. In fact, on Friday we had several little girls splashing through the sprinkler system on the roof. Sounds like we got it online just in time.

Friday, July 1, 2011

Solar Conveyor

I am trying out a new way to bring solar heat inside, without using air or water as a medium. From a web search, it doesn't seem like anyone is trying this, except someone patented a solar belt collector way back in 1975!

Here is the inside belt. There are no fans. The belt heats the building through radiation and natural convection.

The powered conveyor roller only consumes 5W, and since the belt gives off almost 500W of heat, the coefficient of performance is almost 100.





The same belt extends outside where it absorbs the sun's energy. The glazing is inexpensive 6mm twin-wall polycarbonate. The belt is made from an EPDM pond liner. It is not as black as it could be, so the overall efficiency of the system is about 40-50%.

Wednesday, June 29, 2011

The bar has been set for awesome shop signs.

Lisa's masterpiece.
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.

Wednesday, June 1, 2011

Super King Kong Double Whammy Green Machine


The Pine River Dam Park has its playground equipment. On Tuesday, Rainbow Play Systems installed the "Super King Kong Double Whammy Green Machine" at the cleared area north of the Pine River Dam, just off of Barclay Ave.

The installers normally take only several hours to complete installation of normal backyard models. However, this model is so large it took them all day, through rain and blustery wind.
It comes complete with a set of three swings, a climbing wall, picnic table and rocking bench, two slides, and four clubhouses.

It took no time before the playground was swarming with kids.

The unit is so large that it barely fits into the prepared 30x55ft area. There are plans to expand the areas around the slides and buoy ball swing for safety.

If you want to see more information on this monstrosity, visit the Rainbow Play Systems website.

Thursday, May 19, 2011

Pine River Dam Park Under Construction

In partnership with Rotary International, HUG has offered to help prepare a site in downtown Pine River for a future playground. The Dam River Park, located just north of the Pine River Dam on Barclay Ave, was in serious need of an overhaul.

First, the derelict exterior fireplace was removed, twelve horseshoe posts were taken out, and around 50 tons of play sand was delivered.

We then took 7 red pines from our property, cut them, stripped them, and hauled them out to the site.


We dug trenches for the logs to be placed in.


Jim measured (twice) and cut (once).


We notched the ends, arraigned the logs into a rectangle and finally secured them so they wouldn't roll.


After the logs were arraigned, we leveled out the sand and raked around the logs to shore up the sand.

The playground equipment will be delivered next week and once installed we will be installing a balance beam from the leftover logs. We should be finished just in time for Frost Free Friday next Friday the 27th.

Wednesday, April 6, 2011

Solar Panel Carts

Jake's been kept pretty busy over the last several weeks. RREAL has commissioned him to create a specially designed cart to carry the solar panels they create
After improving on a design that his father made

Jake cut the steel...

welded the frame...
and finished the cart.

Four carts were made overall and several of the older models were touched up. They, now have the capability to carry 50-60 solar panels that can reach up to three thousand pounds. Good work, Jake.

Monday, March 14, 2011

Weekends Over!



It was a busy day Monday. Jim #1 and Jim #2 descended on the hoop house to begin restoration and repair of the roof. They found several small tears and were able to simply tape them up, but had to patch up a particularly large one.

They used a reinforced plastic and sewed it up with Jim #1 roasting inside the already cooking greenhouse and Jim #2 laying comfortably outside on a raised pallet.

Inside the shop, Jake drew up designs on a solar panel transfer cart for RREAL. He was able to improve on a design his father drew up and began construction on Monday.

At the SPARC, Mark and Doug began installation of the water system.
Also, instead of simply propping in a fiberglass shower stall, it was decided that a base of tile was preferable. Laying of the tile began today, as well.